Video Roundup

DIY Meshtastic Solar Node: Muziworks Uno Full Build Guide

Meshtastic Channel: Vivian Van Zyl (LoraMeshDevices.com) (opens in a new tab) Published: Length: 30:03

The views contained in this video are those of its author and do not necessarily reflect those of Cache Valley Mesh.

What this video covers

Vivian Van Zyl of LoraMeshDevices.com turns an Elecrow Muziworks Muzi Base Uno into a solar powered Meshtastic node. He starts by flashing the 2.8 firmware from the web flasher, keeping a backup of the old firmware first, and shows the new antenna noise reading that 2.8 adds in the app.

The build uses an AI assisted, 3D printed mounting plate inside a waterproof case, with a breather plug to let moisture escape, a small solar panel soldered on the outside, a battery held with 3M tape, and an N-type connection to a larger 915 MHz antenna. He suggests setting a permanent node to the client base role, runs trace routes to check signal before and after standing the antenna upright, and mounts the finished node outdoors for a few days of testing.

Summary by Cache Valley Mesh.

Watch on YouTube (opens in a new tab) About Meshtastic

More Meshtastic videos

All videos in the Video Roundup