Get Started with Meshtastic
From a new LoRa device to your first check-in on the Intermountain Mesh.
Meshtastic guide
Overview
Meshtastic sends short text messages and optional GPS locations over LoRa radios, with no cell service, WiFi, or internet. Cache Valley has moved from the default LongFast preset to MediumFast on frequency slot 51, which joins the Intermountain Mesh, also known as Freq51. A radio left on the defaults will not hear the local mesh.
Step 1: Get a supported device
Each Meshtastic radio is called a node. You pair a small LoRa radio with the free Android or iOS app over Bluetooth, or use it standalone. Pick hardware from the official Meshtastic supported devices list (opens in a new tab), which keeps the current models and their features.
Range depends on terrain, antenna height, and how many nodes are helping relay.
Step 2: Install firmware and pair the app
Follow the official Meshtastic getting started guide (opens in a new tab) to install firmware with the Meshtastic web flasher (opens in a new tab) and connect to your device. Check the Meshtastic blog (opens in a new tab) first: in October 2026 the project revoked firmware 2.8.0 and replaced it with 2.8.1, an alpha that most operators should wait to install.
Step 3: Set your region
Per the official initial configuration guide (opens in a new tab), you must set your region before you can communicate over the mesh. The region controls which frequency range the device uses. Choose the region code for your location from the list in that guide.
Step 4: Switch to the Freq51 preset
Cache Valley completed its migration from LongFast to MediumFast on frequency slot 51. That preset links local operators with others up and down the Wasatch Front, possibly as far north as Boise and as far south as Spanish Fork.
| Setting | Value |
|---|---|
| Modem preset | MediumFast |
| Frequency slot | 51 |
| Details | Freq51 migration notes (opens in a new tab) |
The official post Why your new node might not see your local mesh (opens in a new tab) explains why a node on a different preset or frequency hears nothing, and how to check.
Step 5: Check in on the weekly net
The Freq51 Weekly Net (opens in a new tab) runs every Wednesday from 5:00 p.m. to 11:59 p.m. Mountain time on the Meshtastic channel "Freq51". Send a message in this exact format: (LONG NAME) - (CITY, STATE) #FREQ51. Confirm it was received on the MeshView Weekly Net page (opens in a new tab) (username mesh, password mesh). Check-ins are also mirrored to the Freq51 Discord channel #mt-weekly-net.
For emergencies, Freq51 Emergency Communications (opens in a new tab) sets the mesh emergency channel standards, including ec-n-ut for Cache, Davis, Morgan, Rich, and Weber counties.
Keep going
- Read the full Meshtastic page, including what we know about it in Cache Valley.
- Meshtastic supported devices (official docs)
- See Meshtastic on the coverage maps page
- Find Meshtastic events on the community calendar
- Know of an event, a node, or a correction for this guide? Contact us with a source we can cite.
Sources
Settings and rules change. Confirm values with these sources before you transmit. This guide was last checked on 17 November 2026.
- Meshtastic: Getting started (opens in a new tab)
- Meshtastic: Initial configuration (opens in a new tab)
- Meshtastic: Supported devices (opens in a new tab)
- Meshtastic blog: Why your new node might not see your local mesh (opens in a new tab)
- Meshtastic blog: Let's talk about 2.8 (opens in a new tab)
- Freq51 migration notes (opens in a new tab)
- Freq51 Weekly Net (opens in a new tab)
- Freq51 Emergency Communications (opens in a new tab)