Get Started with MeshCore

From a supported LoRa board to your first message on the Cache Valley mesh.

MeshCore guide

Overview

MeshCore sends encrypted text messages over LoRa radios with no cell service, internet, or subscription. Cache Valley uses the MountainWest Mesh settings, so a radio set up with this guide can reach the repeaters already on the air here.

Step 1: Get a supported 915 MHz radio

MeshCore runs on many common LoRa boards, including the Heltec V3 (opens in a new tab), LilyGo T-Deck (opens in a new tab), RAK WisBlock RAK4631 (opens in a new tab), Seeed T1000-E (opens in a new tab), and Station G2. The MeshCore FAQ (opens in a new tab) keeps the current list. In the U.S., buy the 915 MHz version.

To start messaging you need one board, an antenna, and a phone or computer for the MeshCore app. Companion apps run on Android, iOS, Windows, macOS, Linux, and the web. See Hardware and gear for more.

Step 2: Flash Companion firmware

A companion is your personal radio. It pairs with your phone or computer and does not relay other people's traffic. Flash Companion firmware, version 1.14 or newer, from the official MeshCore web flasher (opens in a new tab). It runs in a web browser, with no compiling required.

Step 3: Pair the app and apply the local settings

Install a current MeshCore app, pair over Bluetooth, and enter these values, or apply them with the mwmesh Configurator (opens in a new tab). They are the MountainWest Mesh community recommendations (opens in a new tab).

MountainWest Mesh companion settings for Cache Valley
SettingValue
Frequency910.525 MHz
Bandwidth62.5 kHz
Spreading factorSF7
Coding rateCR5 (4/5)
TX power22 dBm. Account for antenna gain so you stay within 30 dBm EIRP.
Path hash size2 bytes. In the app, open Settings, then Experimental Settings.
Flood advert interval2820 minutes (47 hours)
Zero-hop advert0 minutes (off)
Admin passwordChange from the default to a strong, unique password

Operators remain responsible for FCC Part 15 compliance.

Step 4: Send an advert and find the local mesh

Send an advert and see who answers. The public MeshCore map (opens in a new tab) shows repeaters and room servers in the valley, and our coverage maps page opens it centered on Cache Valley. The map is operator-uploaded, so a node on the map may not be on the air today.

Ask the group. Which group channels people use in Cache Valley, and who to say hello to, change over time. Ask in the Freq51 Discord (opens in a new tab) MeshCore channels or through MountainWest Mesh (opens in a new tab). MeshChannels.org (opens in a new tab) also maps the MeshCore channels people use in each area.

Step 5: Help the mesh grow with a repeater

The initial rollout of MeshCore in Cache Valley has begun, and a rooftop or hilltop repeater (opens in a new tab) is the most useful way to help. Use a second board with Repeater firmware, mounted high, often with solar power and a weatherproof box (opens in a new tab). Follow Set up a rooftop repeater for the full settings, transmission delays, and region scopes, and register the repeater with MountainWest Mesh (opens in a new tab).

Keep going

Sources

Settings and rules change. Confirm values with these sources before you transmit. This guide was last checked on 17 November 2026.