Get Started with Wi-Fi HaLow

Build one solid 900 MHz Wi-Fi link before you try a mesh.

HaLow guide

Overview

Wi-Fi HaLow (IEEE 802.11ah) is license-free Wi-Fi below 1 GHz that carries ordinary IP traffic. We have not found a public HaLow deployment in Cache Valley, so there are no local settings to match yet. This guide covers a first link you can build and test yourself.

Step 1: Get two HaLow units

The most common enthusiast gear is the Morse Micro HaLowLink family. The HaLowLink 2 (opens in a new tab) pairs an MM8108 HaLow radio with a 2.4 GHz Wi-Fi access point, two Gigabit Ethernet ports, and OpenWrt software, powered by USB-C. A typical link uses two units: one at the internet or server end, and one at the remote site. See Hardware and gear.

Step 2: Set the U.S. regulatory domain

No license is required, but you must use certified equipment with the correct U.S. regulatory setting. The HaLowLink User Guide (PDF) (opens in a new tab) covers setup for that hardware.

HaLow shares the 902 to 928 MHz band with Meshtastic and MeshCore, so plan frequency separation if HaLow and LoRa radios share a tower.

Step 4: Add a third unit and test a mesh

HaLowLink devices support IEEE 802.11s mesh, which forms self-healing multi-hop links, and EasyMesh. Morse Micro marks 802.11s as beta, and throughput drops with each hop. See Morse Micro APPNOTE-32 (PDF) (opens in a new tab) for configuration.

Step 5: Share what you build

Ask the group. There is no local HaLow group or published channel plan for Cache Valley yet. HaLow is on the list of technologies Cache Valley Mesh is exploring. If you run a HaLow link in the valley and can share a public write-up, contact us and we will cite it on the HaLow page.

Keep going

Sources

Settings and rules change. Confirm values with these sources before you transmit. This guide was last checked on 17 November 2026.