Get Started with AREDN
Licensed microwave IP mesh, starting with two nodes that can see each other.
AREDN guide
Overview
AREDN lets licensed hams build a high-speed, self-healing IP data mesh over Part 97 microwave links. We have not verified a current public roster of live Cache Valley AREDN nodes, channels, or SSIDs, so this guide does not give local settings. Ask local hams before you buy or aim anything.
Step 1: Get licensed and learn the rules
AREDN runs under FCC Part 97, so you need an amateur radio license. Read the frequency and power rules for the band you plan to use. The ARRL getting licensed page (opens in a new tab) explains the license exams, and the Bridgerland Amateur Radio Club (opens in a new tab) is the local club.
Step 2: Read the AREDN docs before buying radios
Hardware is usually commercial outdoor Wi-Fi gear flashed with AREDN firmware. Supported models change over time, so check the AREDN firmware download guide (opens in a new tab) for current devices before you buy, then follow Installing AREDN Firmware (opens in a new tab). Typical traits are PoE power, weatherproof enclosures, and integrated or external directional antennas. See Bands and hardware for the U.S. band trade-offs.
Step 3: Find out who is on the air nearby
The AREDN Beginner's Guide (opens in a new tab) suggests checking the AREDN world map (opens in a new tab) and asking in the regional forums on arednmesh.org. The world map is operator-uploaded and sometimes stale. Our coverage maps page opens it centered on Cache Valley.
Step 4: Plan line-of-sight paths
Microwave paths need line of sight and attention to the Fresnel zone, and hills and rooftops matter a lot in a valley like ours. Plan backup portable nodes too. Topography and rooftop access were lessons from the 2024 Utah ARES Simulated Emergency Test (opens in a new tab).
Step 5: Start with two nodes
Two nodes that can see each other beat a dozen radios that cannot. Nodes link only when they have a clear RF path and matching band, channel, and channel width. If you build a publicly documentable node in or near Cache Valley, upload it to the AREDN map and contact us with a citable source so we can update the AREDN page.
Keep going
- Read the full AREDN page, including what we know about it in Cache Valley.
- AREDN bands and hardware
- See AREDN on the coverage maps page
- Find AREDN events on the community calendar
- Know of an event, a node, or a correction for this guide? Contact us with a source we can cite.
Sources
Settings and rules change. Confirm values with these sources before you transmit. This guide was last checked on 17 November 2026.
- AREDN overview (opens in a new tab)
- AREDN Beginner's Guide (opens in a new tab)
- AREDN: Downloading firmware (opens in a new tab)
- AREDN: Installing firmware (opens in a new tab)
- AREDN world map (opens in a new tab)
- ARRL Utah Section: 2024 SET write-up (opens in a new tab)
- ARRL: Getting licensed (opens in a new tab)