Get Started with APRS

Share your position on 144.390 MHz and see which digipeaters hear you.

APRS guide

Overview

APRS shares positions, weather reports, bulletins, and short messages on one common ham frequency. It is active in Cache Valley, with digipeaters such as KF6RAL-10 on Logan Peak, and BARC uses it to track vehicles at public service events.

Step 1: Earn a Technician license

APRS operates under FCC Part 97, so messages are not encrypted and every packet carries your callsign. A Technician license is enough for 144.390 MHz. The Bridgerland Amateur Radio Club (opens in a new tab) offers license classes, and the ARRL getting licensed page (opens in a new tab) explains the exams.

Step 2: Choose your gear

  • A radio with built-in APRS and GPS, such as several Kenwood and Yaesu mobiles and handhelds.
  • Or any 2 meter radio paired with a TNC (terminal node controller) or a software modem on a phone or computer.
  • Or a small standalone tracker for a vehicle.

See Hardware and gear. BARC lends configured trackers to operators for public service events.

Step 3: Set the frequency, path, and SSID

APRS settings for mobile use in Cache Valley
SettingValue
Frequency144.390 MHz
Path (mobile)WIDE1-1,WIDE2-1
SSIDMatch your station type, such as -9 for a primary mobile

See APRS.org (opens in a new tab) for background on the system from its creator, Bob Bruninga, WB4APR.

Ask the group. The path for a fixed home station, iGate, or digipeater, and where a new digipeater would help, are not published for Cache Valley. Ask BARC before you set up a fixed station.

Step 4: See who heard you

Drive or walk around, then look yourself up on aprs.fi (opens in a new tab) or aprs.world (opens in a new tab). The DN41 grid listing on OpenAPRS (opens in a new tab) shows local digipeaters and iGates, including KF6RAL-10 on Logan Peak, N7RDS-2 in River Heights, and KF7VJO-3 on Little Mountain. Station lists change, so check a live map before you rely on one. Our coverage maps page links to these maps.

Step 5: Volunteer at a public service event

BARC asks mobile stations at public service events to run APRS so net control can see their locations. For LoToJa in September 2023, BARC deployed three portable digipeaters and a portable iGate to cover 35 support vehicles along the route (ARRL (opens in a new tab)). Volunteer for a BARC public service event to see APRS in real use.

Keep going

Sources

Settings and rules change. Confirm values with these sources before you transmit. This guide was last checked on 17 November 2026.