Get Started with AllStar Link

Licensed voice linking over the internet, starting with the BARC 147.200 repeater.

AllStar guide

Overview

AllStar Link lets licensed hams link repeaters and personal radio nodes over the internet. In Cache Valley, BARC lists AllStar node 52787 on the AC7O 147.200 MHz repeater at Smithfield Fire Station. The easiest way to start is to talk on that repeater with a 2 meter radio.

Step 1: Get licensed and learn repeater etiquette

Transmitting through AllStar requires a valid amateur radio license and Part 97 operating practice. The ARRL getting licensed page (opens in a new tab) explains the exams. Listen on the local repeaters to learn their etiquette before you transmit.

Step 2: Program the 147.200 repeater

BARC AC7O repeater with AllStar node 52787
SettingValue
Frequency147.200 MHz (+ offset)
CTCSS tone103.5 Hz
CallsignAC7O
LocationSmithfield Fire Station
AllStar node52787
Also on this repeaterIRLP node 3381, EchoLink node 495125

These values come from the BARC repeaters page (opens in a new tab) and the Utah VHF Society repeater list (opens in a new tab). Read the BARC notes for any control or linking guidance they publish.

Step 3: Check live node status

Online and reporting status can change. Check the AllStarLink stats page for node 52787 (opens in a new tab) before you depend on a link for an event or emergency exercise.

Ask the group. BARC carries its club and ARES nets mainly on its FM linked system and other modes. Do not assume a net is on AllStar. Check the BARC nets page (opens in a new tab) and ask BARC which nets, if any, are linked.

Step 4: Learn how to run your own node

A personal node is a computer, commonly a Raspberry Pi (opens in a new tab) or x86 host, wired or radio-linked to a transceiver and registered with AllStarLink. Current AllStarLink ASL3 packages, and HamVoIP, bundle the Asterisk and app_rpt stack so you do not have to build it from scratch. Start with the AllStarLink manual (opens in a new tab) and allstarlink.org (opens in a new tab) for node registration.

Some nodes allow softphone or app clients, but only when the node operator has set up credentials and access.

Keep going

Sources

Settings and rules change. Confirm values with these sources before you transmit. This guide was last checked on 17 November 2026.